RS485 Transceiver

Description

WT3485/WT485 is a 3.3V/5V power supply, half-duplex, low power, low slew rate RS485 Transceiver. They Fully meets the TIA/EIA-485 standard.
WT3485/WT485 includes a driver and a receiver, both of which can be independently enabled and disabled. When both are disabled, the driver and receiver outputs are high-impedance state. WT3485/WT485 has a 1/8-unit-load receiver input impedance, that allows up to 256 transceivers on the bus. The WT3485/WT485 features reduced slew-rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 12/1Mbps.


3.3V/5V Power Supply, Half-duplex

1/8-unit-load, allows up to 256 transceivers on the bus
Short-circuit protection
Thermal shutdown protection
Low-Current Shutdown Mode
Hot-Swap Input Structures on DE and /RE
True Fail-Safe Receiver
Excellent noise immunity
Integrated transient voltage suppression
12/1Mbps in Electrically Noisy Environments
ESD Protection for Bus Terminals:
Contact Discharge±16KV,HBM±16KV
Reset
Part No Description Vin (V) Ishdn (µA) OCP OTP Hot-Swap DE & /RE True Fail-Safe Receiver ESD(HBM)(A、B) (kV) ESD(HBM)(Others) (kV) Rate (Mbps) Ta(℃) Package Data sheet

Facebook

Twitter

Youtube